NSN 5306-01-433-9005
Coaxial Connector
Between 1.982 inches and 1.997 inches fastener length, double hexagon w/hole head style, between 0.790 inches and 0.810 inches head height, width between flats: between 1.047 inches and 1.062 inches .
Manufacturer part number 65C37165-3 for national stock number 5306014339005.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-433-9005.
-
MPN or Model
65C37165-3
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.997 inches -
Fastener Length
Between 1.982 inches and 1.997 inches -
Head Style
Double hexagon w/hole -
Head Height
Between 0.790 inches and 0.810 inches -
Width Between Flats
Between 1.047 inches and 1.062 inches -
Extended Washer Diameter
Between 1.615 inches and 1.625 inches -
Extended Washer Thickness
Between 0.212 inches and 0.232 inches -
Grip Diameter
Between 0.9980 inches and 0.9990 inches -
Thread Diameter
1.000 inches -
Grip Length
Between 0.990 inches and 1.010 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Nickel alloy 718 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 1560-01-273-9554 MPN 65-2518-31Aircraft Structural Plate
- 1560-01-486-1997 MPN 69-10803-800Aircraft Structural Component Support
- 1560-01-537-8260 MPN 65-64864-3Aircraft Fairing
- 1560-01-435-5579 MPN 65-18441-35Aircraft Structural Panel
- 1560-00-073-2554 MPN 107S8397-3Ramp Skin Assembly
- 1560-00-073-4235 MPN A02S4116-1Light Cover
- 1560-00-076-9657 MPN 66-11795-1Thrust Reverser Switch Striker
- 1680-00-251-9193 MPN 6-41750Universal Receptacle Signal Arm
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-433-9005 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
65C37165-3 | The Boeing Company |
65C37165-3 | Boeing Company, The |
Stock Check
- NS: 5
- NE: 27