NSN 5306-01-433-9470
Coaxial Connector
2.008 inches fastener length, spline extended washer head style, 0.337 inches head height, extended washer diameter: between 0.639 inches and 0.649 inches .
Manufacturer part number MS14490-06-020 for national stock number 5306014339470.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-433-9470.
-
MPN or Model
MS14490-06-020
-
Fastener Length
2.008 inches -
Head Style
Spline extended washer -
Head Height
0.337 inches -
Extended Washer Diameter
Between 0.639 inches and 0.649 inches -
Extended Washer Thickness
0.690 inches -
Grip Diameter
0.373 inches -
Head Minor Diameter
Between 0.423 inches and 0.438 inches -
End Application
Aircraft fokker f-60u, landing gear -
Grip Length
1.250 inches
More from these suppliers
- 5935-00-051-1680 MPN MS24266R18T14SElectrical Plug Connector
- 5935-00-068-3933 MPN MS3116J8-3SElectrical Plug Connector
- 5935-00-079-8413 MPN MS3100R24-22SCElectrical Receptacle Connector
- 5935-00-093-0415 MPN MS3108B22-16PElectrical Plug Connector
- 5935-00-103-1686 MPN MS3106R22-34SElectrical Plug Connector
- 5935-00-131-9308 MPN MS24265R18B8P6Electrical Receptacle Connector
- 5935-00-152-7762 MPN MS18193T2Electrical Connector Backshell
- 5935-00-167-5762 MPN M83723-16S16AElectrical Connector Backshell
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-433-9470 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS14490-06-020 | Military Standards |