NSN 5306-01-434-7464
Close Tolerance Hex Head Bolt
Between 1.1574 inches and 1.1874 inches fastener length, hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number BACB30NF4-12Z for national stock number 5306014347464.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-434-7464.
-
MPN or Model
BACB30NF4-12Z
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.389 inches -
Fastener Length
Between 1.1574 inches and 1.1874 inches -
Head Style
Hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.2954 inches and 0.2964 inches -
Thread Diameter
0.2500 inches -
Grip Length
Between 0.7400 inches and 0.7600 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or ams 6322 assn standard 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-505-2987 MPN LS15264-3-12Machine Screw
- 5305-01-129-4432 MPN SC2671-3-11Machine Screw
- 5306-00-074-2701 MPN VFK100G-05012Shear Bolt
- 5306-00-443-6815 MPN VFK100G-06070Shear Bolt
- 5306-01-005-0463 MPN VAL23033-6H8Shear Bolt
- 5306-01-005-0472 MPN VAL23029-4-14Close Tolerance Bolt
- 5306-01-025-6434 MPN VAL23029-4-18Close Tolerance Bolt
- 5306-01-054-3407 MPN C7521-4-8Shear Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-434-7464 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NF4-12Z | Huck International, Inc. |
BACB30NF4-12Z | The Boeing Company |
BACB30NF4-12Z | Sps Technologies, Llc |
BACB30NF4-12Z | Valley-todeco, Inc. |
BACB30NF4-12Z | Arconic Global Fasteners & Rings, |
BACB30NF4-12Z | Federal Manufacturing Corporation |
BACB30NF4-12Z | Sps Technologies, Llc |
BACB30NF4-12Z | Sps Technologies, Llc |
BACB30NF4-12Z | Sps Technologies, Llc |
BACB30NF4-12Z | Huck Intl Inc |