NSN 5306-01-434-7625
Close Tolerance Hex Head Bolt
Between 3.9714 inches and 4.0014 inches fastener length, hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number BACB30NE6-54Z for national stock number 5306014347625.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-434-7625.
-
MPN or Model
BACB30NE6-54Z
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.5 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.578 inches -
Fastener Length
Between 3.9714 inches and 4.0014 inches -
Head Style
Hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.4203 inches and 0.4213 inches -
Thread Diameter
0.3750 inches -
Grip Length
Between 3.3650 inches and 3.3850 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel comp e4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response or ams 6322 assn standard 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2 class 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-435-3875 MPN BACB30LU7-37Close Tolerance Screw
- 5305-01-464-4371 MPN VCL0009-3-8Close Tolerance Screw
- 5305-01-512-8411 MPN 3M1170D3-5AFClose Tolerance Screw
- 5306-01-043-1871 MPN VEP220121-5V-22Shear Bolt
- 5306-01-144-2219 MPN VCG0002-10-22Close Tolerance Bolt
- 5306-01-209-7862 MPN VAL23033-4DH2XShoulder Bolt
- 5306-01-422-1809 MPN VCJ0002-16-37DShear Bolt
- 5306-01-445-5654 MPN VCJ0002-8-38Close Tolerance Bolt
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-434-7625 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BACB30NE6-54Z | Huck International, Inc. |
BACB30NE6-54Z | Valley-todeco, Inc. |
BACB30NE6-54Z | Sps Technologies, Llc |
BACB30NE6-54Z | Arconic Global Fasteners & Rings, |
BACB30NE6-54Z | Federal Manufacturing Corporation |
BACB30NE6-54Z | Sps Technologies, Llc |
BACB30NE6-54Z | Sps Technologies, Llc |
BACB30NE6-54Z | The Boeing Company |
BACB30NE6-54Z | Sps Technologies, Llc |
BACB30NE6-54Z | Voi-shan/chatsworth |
BACB30NE6-54Z | Huck Intl Inc |