NSN 5306-01-435-9276
Coaxial Connector
5.030 inches fastener length, double hexagon extended washer head style, 0.125 inches head height, width between flats: 1.312 inches .
Manufacturer part number MS21250-20052 for national stock number 5306014359276.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-435-9276.
-
MPN or Model
MS21250-20052
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.780 inches -
Fastener Length
5.030 inches -
Head Style
Double hexagon extended washer -
Head Height
0.125 inches -
Width Between Flats
1.312 inches -
Extended Washer Diameter
Between 2.115 inches and 2.125 inches -
Extended Washer Thickness
0.269 inches -
Grip Diameter
Between 1.247 inches and 1.249 inches -
End Application
Spec item -
Thread Diameter
1.250 inches -
Grip Length
3.250 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Material
Steel comp 4140 or steel comp 4340 or steel comp 6150 or steel comp 8740 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5950-00-078-2329 MPN MS90542-10Radio Frequency Coil
- 5935-00-090-7062 MPN MS3152-16Electrical Connector Cable Clamp
- 5930-00-099-0358 MPN MS24658-29FToggle Switch
- 5935-00-111-4872 MPN MS3182E37BElectrical Connector Cover
- 5935-00-201-7261 MPN MS27473T8B98SNElectrical Plug Connector
- 5950-00-203-5621 MPN MS75084-02Radio Frequency Coil
- 5935-00-222-7915 MPN MS3106A36-10PElectrical Plug Connector
- 5935-00-250-7781 MPN MS27497E20B41SElectrical Receptacle Connector
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-435-9276 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-20052 | Military Standards |