NSN 5306-01-437-0205
Coaxial Connector
Between 2.794 inches and 2.824 inches fastener length, dished hexagon head style, between 0.438 inches and 0.453 inches head height, width between flats: between 1.239 inches and 1.252 inches .
Manufacturer part number NAS6714-26 for national stock number 5306014370205.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-437-0205.
-
MPN or Model
NAS6714-26
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.184 inches -
Fastener Length
Between 2.794 inches and 2.824 inches -
Head Style
Dished hexagon -
Head Height
Between 0.438 inches and 0.453 inches -
Width Between Flats
Between 1.239 inches and 1.252 inches -
Grip Diameter
Between 0.8730 inches and 0.8740 inches -
Thread Diameter
0.875 inches -
Grip Length
Between 1.615 inches and 1.635 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Minimum Yield Strength
95000 pounds per square inch -
Material
Steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, type 2, class2 federal specification all treatment responses -
Thread Series Designator
Unjf -
Specification Data
80205-nas6714 professional/industrial association standard
More from these suppliers
- 5940-01-451-4410 MPN NAS1063A20-500AXTerminal Board Marker Strip
- 5305-00-007-2955 MPN NAS1743C4T12USocket Head Cap Screw
- 5305-00-008-9115 MPN NAS1190C02T7LSocket Head Cap Screw
- 5305-00-068-1652 MPN MS51029-37Setscrew
- 5305-00-068-7064 MPN MS35277-44Machine Screw
- 5305-00-079-1749 MPN MS24694S29Machine Screw
- 5305-00-095-6580 MPN NAS1218-6-3Machine Screw
- 5305-00-118-3006 MPN NAS1100-3-15Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-437-0205 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6714-26 | National Aerospace Standards |