NSN 5306-01-437-5526
Coaxial Connector
Between 1.470 inches and 1.500 inches fastener length, dished hexagon head style, 0.250 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS6608-12 for national stock number 5306014375526.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-437-5526.
-
MPN or Model
NAS6608-12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.735 inches -
Fastener Length
Between 1.470 inches and 1.500 inches -
Head Style
Dished hexagon -
Head Height
0.250 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4985 inches and 0.4995 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 0.740 inches and 0.760 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-60422 military specification 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qqp-416 ty2cl2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6608 professional/industrial association standard
More from these suppliers
- 5305-00-006-2346 MPN NAS1133-42Close Tolerance Screw
- 5305-00-007-6175 MPN NAS1100C02-5PMachine Screw
- 5305-00-007-9895 MPN NAS1102C04-12PMachine Screw
- 5305-00-008-9119 MPN NAS1190E04T22LSocket Head Cap Screw
- 5305-00-078-9643 MPN MS27039-1-34Machine Screw
- 5305-00-206-2213 MPN NAS517-4-22Machine Screw
- 5305-00-225-8507 MPN MS90725-43Hexagon Head Cap Screw
- 5305-00-245-4592 MPN NAS623-2-66Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-437-5526 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6608-12 | National Aerospace Standards |
NAS6608-12 | National Aerospace Standards |
NAS6608-12 | National Aerospace Standards |
NAS6608-12 | National Aerospace Standards |