NSN 5306-01-438-0466
Close Tolerance Hex Head Bolt
Between 2.017 inches and 2.047 inches fastener length, undercut hexagon head style, between 0.188 inches and 0.203 inches head height, width between flats: between 0.553 inches and 0.564 inches .
Manufacturer part number BAC30LJ6DU25 for national stock number 5306014380466.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-438-0466.
-
MPN or Model
BAC30LJ6DU25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.470 inches -
Fastener Length
Between 2.017 inches and 2.047 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.188 inches and 0.203 inches -
Width Between Flats
Between 0.553 inches and 0.564 inches -
Grip Diameter
Between 0.4047 inches and 0.4057 inches -
Shank Unthreaded Hole Diameter
0.106 inches first hole and 0.116 inches first hole -
Thread Diameter
0.375 inches -
Grip Length
Between 1.860 inches and 1.886 inches -
Thready Qty Per Inch (tpi)
24 -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.860 inches all holes and 1.886 inches all holes -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5737 assn standard 1st material response or ams5853 assn standard 2nd material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 type 2 or type 8 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 1560-00-026-2099 MPN 9-45826-1Actuator Brace
- 1560-00-073-1038 MPN 107S8352-1Aircraft Door
- 1560-00-073-1153 MPN 107S8445-1Fitting Assembly
- 1560-00-073-4007 MPN 107C2354-5Spring Centering Piston
- 5940-00-082-5094 MPN BACT40A3GStud Terminal
- 1680-00-092-2977 MPN 9-41199-3Reaction Cylinder Assembly
- 5905-00-106-1282 MPN BACR14CJ223Composition Fixed Resistor
- 1560-00-237-0867 MPN 9-63039-1Aircraft Structural Component Support
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-438-0466 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
BAC30LJ6DU25 | The Boeing Company |