NSN 5306-01-438-8260
Coaxial Connector
Between 3.3190 inches and 3.3490 inches fastener length, dished hexagon head style, between 0.6250 inches and 0.6400 inches head height, width between flats: between 1.8010 inches and 1.8140 inches .
Manufacturer part number NAS6620-27 for national stock number 5306014388260.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-438-8260.
-
MPN or Model
NAS6620-27
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.6460 inches -
Fastener Length
Between 3.3190 inches and 3.3490 inches -
Head Style
Dished hexagon -
Head Height
Between 0.6250 inches and 0.6400 inches -
Width Between Flats
Between 1.8010 inches and 1.8140 inches -
Grip Diameter
Between 1.2475 inches and 1.2490 inches -
Thread Diameter
1.2500 inches -
Grip Length
Between 1.6780 inches and 1.6980 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf -
Specification Data
80205-nas6620-27 professional/industrial association standard
More from these suppliers
- 5940-01-135-7077 MPN NAS1744-7Conductor Splice
- 5940-01-425-7395 MPN NAS1063A11-324Terminal Board Marker Strip
- 5940-01-449-7678 MPN NAS1063A12-N1001Terminal Board Marker Strip
- 5305-00-001-9750 MPN NAS1351-4-14PSocket Head Cap Screw
- 5305-00-052-9971 MPN MS51862-26CTapping Screw
- 5305-00-058-0778 MPN MS24678-67CSocket Head Cap Screw
- 5305-00-182-7464 MPN NAS1352-01LE4PSocket Head Cap Screw
- 5305-00-182-9531 MPN NAS1191E3P6NSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-438-8260 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6620-27 | National Aerospace Standards |
Stock Check
- NE: 17