NSN 5306-01-440-9714
Coaxial Connector
Between 0.433 inches and 0.463 inches fastener length, flat countersunk head style, between 0.296 inches and 0.331 inches head diameter, grip diameter: between 0.1625 inches and 0.1635 inches .
Manufacturer part number NAS7402-2 for national stock number 5306014409714.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-440-9714.
-
MPN or Model
NAS7402-2
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
Between 0.433 inches and 0.463 inches -
Head Style
Flat countersunk -
Head Diameter
Between 0.296 inches and 0.331 inches -
Grip Diameter
Between 0.1625 inches and 0.1635 inches -
Thread Diameter
0.164 inches -
Grip Length
Between 0.115 inches and 0.135 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Countersink Angle
Between 99.0 degrees and 101.0 degrees -
Material
Steel comp 4340 or steel comp 8740 -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416, cl2 ty2 federal specification single treatment response -
Thread Series Designator
Unjf -
Specification Data
80205-nas7402 professional/industrial association standard
More from these suppliers
- 1560-01-423-0213 MPN NAS6708D38Aircraft Structural Component Support
- 5935-00-111-1890 MPN NAS1665-10Electrical Connector Backshell
- 5305-00-005-5809 MPN NAS1631E3Machine Screw
- 5305-00-008-5897 MPN NAS1102C5-14Machine Screw
- 5305-00-058-7613 MPN MS24694S133Machine Screw
- 5305-00-058-7614 MPN MS24694S134Machine Screw
- 5305-00-058-7615 MPN MS24694S135Machine Screw
- 5305-00-081-1737 MPN NAS514P1032-8PMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-440-9714 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS7402-2 | National Aerospace Standards |
NAS7402-2 | National Aerospace Standards |
NAS7402-2 | National Aerospace Standards |
NAS7402-2 | National Aerospace Standards |
NAS7402-2 | National Aerospace Standards |
NAS7402-2 | National Aerospace Standards |
NAS7402-2 | National Aerospace Standards |
NAS7402-2 | National Aerospace Standards |
NAS7402-2 | National Aerospace Standards |
NAS7402-2 | National Aerospace Standards |
NAS7402-2 | National Aerospace Standards |
NAS7402-2 | National Aerospace Standards |