NSN 5306-01-441-9525
Coaxial Connector
Supplied with undrilled shank.
Manufacturer part number NAS6210-30 for national stock number 5306014419525.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-441-9525.
-
MPN or Model
NAS6210-30
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.626 inches -
Fastener Length
2.500 inches -
Head Style
Undercut hexagon -
Head Height
0.319 inches -
Width Between Flats
0.934 inches -
Grip Diameter
0.6230 inches -
Shank Unthreaded Hole Diameter
0.146 inches first hole -
Thread Diameter
0.625 inches -
Grip Length
1.875 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.299 inches first hole -
Material
Steel -
Surface Treatment
Cadmium -
Test Data Document
80205-nas6210 standard (includes industry or association standards, individual manufactureer standards, etc.). -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-004-5067 MPN NAS1189E3P8KSocket Head Cap Screw
- 5305-00-044-5504 MPN MS90725-158Hexagon Head Cap Screw
- 5305-00-052-6895 MPN MS35198-58Machine Screw
- 5305-00-059-3670 MPN NAS1635+3+44Machine Screw
- 5305-00-099-7643 MPN MS21125-0426Close Tolerance Screw
- 5305-00-126-6057 MPN NAS333CF6-5Close Tolerance Screw
- 5305-00-470-5920 MPN NAS623-5-20Machine Screw
- 5305-00-471-9119 MPN NAS1101E3-28Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-441-9525 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6210-30 | National Aerospace Standards |
NAS6210-30 | National Aerospace Standards |
NAS6210-30 | National Aerospace Standards |
NAS6210-30 | National Aerospace Standards |
NAS6210-30 | National Aerospace Standards |
NAS6210-30 | National Aerospace Standards |
NAS6210-30 | National Aerospace Standards |
NAS6210-30 | National Aerospace Standards |
NAS6210-30 | National Aerospace Standards |
NAS6210-30 | National Aerospace Standards |
NAS6210-30 | National Aerospace Standards |