NSN 5306-01-442-3166
Coaxial Connector
Drill shank hole 0.096/0.116 in..
Manufacturer part number NAS1107-47D for national stock number 5306014423166.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-442-3166.
-
MPN or Model
NAS1107-47D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.428 inches and 0.478 inches -
Fastener Length
Between 3.375 inches and 3.405 inches -
Head Style
Dished hexagon -
Head Height
Between 0.219 inches and 0.234 inches -
Width Between Flats
Between 0.679 inches and 0.690 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Thread Diameter
0.4375 inches -
Grip Length
Between 2.865 inches and 2.885 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hardness Rating
36.0 rockwell c and 40.0 rockwell c -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-510-2081 MPN NAS1063A7Terminal Board Marker Strip
- 5940-01-384-3924 MPN NAS1063C5TB177ATerminal Board Marker Strip
- 5305-00-019-9467 MPN NAS1351-3LN6Socket Head Cap Screw
- 5305-00-060-9820 MPN NAS221C31Machine Screw
- 5305-00-116-5021 MPN NAS1100C04-4Machine Screw
- 5305-00-143-3219 MPN NAS1102-6-16Machine Screw
- 5305-00-160-9513 MPN MS21093-0411Machine Screw
- 5305-00-168-2980 MPN NAS1352-5LE24PSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-442-3166 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1107-47D | National Aerospace Standards |
NAS1107-47D | National Aerospace Standards |
NAS1107-47D | National Aerospace Standards |
NAS1107-47D | National Aerospace Standards |
NAS1107-47D | National Aerospace Standards |
NAS1107-47D | National Aerospace Standards |
NAS1107-47D | National Aerospace Standards |
NAS1107-47D | National Aerospace Standards |