NSN 5306-01-443-6694
Close Tolerance Hex Head Bolt
Between 2.828 inches and 2.875 inches fastener length, hexagon head style, between 0.265 inches and 0.297 inches head height, width between flats: between 0.740 inches and 0.752 inches .
Manufacturer part number AN178C26A for national stock number 5306014436694.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-443-6694.
-
MPN or Model
AN178C26A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.750 inches and 0.829 inches -
Fastener Length
Between 2.828 inches and 2.875 inches -
Head Style
Hexagon -
Head Height
Between 0.265 inches and 0.297 inches -
Width Between Flats
Between 0.740 inches and 0.752 inches -
Grip Diameter
Between 0.4986 inches and 0.4991 inches -
Head Minor Diameter
0.870 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 2.046 inches and 2.078 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Material
Steel comp 431 -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty2, cl3 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-199-3335 MPN AN3106A16-11PElectrical Plug Connector
- 5935-00-259-5980 MPN AN3108B18-4SElectrical Plug Connector
- 5975-00-280-5768 MPN AN3051-6Electrical Conduit Ferrule
- 5930-00-243-8313 MPN AN3235-2Toggle Switch
- 5935-00-248-5838 MPN AN3100A16S1PElectrical Receptacle Connector
- 5935-01-444-1539 MPN AN3100K18-3PElectrical Receptacle Connector
- 5305-00-079-1159 MPN AN526DD832R8Machine Screw
- 5305-00-151-0695 MPN AN501A6-4Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-443-6694 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN178C26A | Aeronautical Standards Group |
Stock Check
- NS: 2
- NE: 49