NSN 5306-01-443-8802
Coaxial Connector
Between 1.635 inches and 1.665 inches fastener length, spline extended washer head style, 0.393 inches head height, extended washer diameter: between 0.807 inches and 0.817 inches .
Manufacturer part number VCG0027-7-18 for national stock number 5306014438802.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-443-8802.
-
MPN or Model
VCG0027-7-18
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.545 inches -
Fastener Length
Between 1.635 inches and 1.665 inches -
Head Style
Spline extended washer -
Head Height
0.393 inches -
Extended Washer Diameter
Between 0.807 inches and 0.817 inches -
Extended Washer Thickness
0.063 inches -
Grip Diameter
Between 0.4360 inches and 0.4370 inches -
Head Minor Diameter
Between 0.673 inches and 0.688 inches -
Thread Diameter
0.437 inches -
Grip Length
Between 1.115 inches and 1.135 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-454-0414 MPN LD111-0045-2416Machine Screw
- 5305-01-591-0926 MPN ST3M557-3D5Close Tolerance Screw
- 5306-00-944-7534 MPN GB511C8-19Shear Bolt
- 5306-01-025-6959 MPN VAL23029-4-3Close Tolerance Bolt
- 5306-01-265-4801 MPN VAL23029-12D35Close Tolerance Bolt
- 5306-01-341-8542 MPN VCD0020-6-18Shear Bolt
- 5306-01-385-9854 MPN VCL0007-3-13Close Tolerance Bolt
- 5306-01-480-6786 MPN VCG0027-5-17Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-443-8802 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCG0027-7-18 | Valley-todeco, Inc. |
AIC871-7-18 | Sps Technologies, Llc |
PBF1535-7-18 | Sps Technologies, Llc |
80994-7-18 | Sps Technologies, Llc |
3408-7-18 | Alcoa Global Fasteners, Inc. |
3D0013-7-18 | Boeing Company, The |