NSN 5306-01-445-5911
Coaxial Connector
2.340 inches fastener length, dished hexagon head style, between 0.250 inches and 0.265 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS6308U29D for national stock number 5306014455911.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-445-5911.
-
MPN or Model
NAS6308U29D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.528 inches -
Fastener Length
2.340 inches -
Head Style
Dished hexagon -
Head Height
Between 0.250 inches and 0.265 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Extended Washer Diameter
0.710 inches -
Extended Washer Thickness
0.200 inches -
Grip Diameter
Between 0.4990 inches and 0.4995 inches -
Shank Unthreaded Hole Diameter
0.111 inches grip -
Thread Diameter
0.500 inches -
Grip Length
1.812 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams5713 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-391-2605 MPN NAS1063A2-TB107BTTerminal Board Marker Strip
- 5935-01-597-6262 MPN 007A044015-2001Electrical Connector Cover
- 5940-01-384-3878 MPN NAS1063A2TB107TTerminal Board Marker Strip
- 5935-00-111-1890 MPN NAS1665-10Electrical Connector Backshell
- 5925-01-604-6597 MPN MS3320-5VCircuit Breaker
- 5305-00-023-2563 MPN NAS603-65Machine Screw
- 5305-00-059-8682 MPN MS35218-39Machine Screw
- 5305-00-078-9643 MPN MS27039-1-34Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-445-5911 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6308U29D | National Aerospace Standards |
NAS6308U29D | National Aerospace Standards |
NAS6308U29D | National Aerospace Standards |
NAS6308U29D | National Aerospace Standards |
NAS6308U29D | National Aerospace Standards |
NAS6308U29D | National Aerospace Standards |
NAS6308U29D | National Aerospace Standards |
NAS6308U29D | National Aerospace Standards |
NAS6308U29D | National Aerospace Standards |
NAS6308U29D | National Aerospace Standards |
NAS6308U29D | National Aerospace Standards |
NAS6308U29D | National Aerospace Standards |
NAS6308U29D | National Aerospace Standards |
NAS6308U29D | National Aerospace Standards |