NSN 5306-01-446-4015
Coaxial Connector
Between 1.089 inches and 1.119 inches fastener length, spline extended washer head style, between 0.302 inches and 0.322 inches head height, extended washer diameter: between 0.575 inches and 0.585 inches .
Manufacturer part number MS21297H05008 for national stock number 5306014464015.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-446-4015.
-
MPN or Model
MS21297H05008
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.589 inches -
Fastener Length
Between 1.089 inches and 1.119 inches -
Head Style
Spline extended washer -
Head Height
Between 0.302 inches and 0.322 inches -
Extended Washer Diameter
Between 0.575 inches and 0.585 inches -
Extended Washer Thickness
Between 0.035 inches and 0.055 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Head Minor Diameter
Between 0.360 inches and 0.375 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.490 inches and 0.510 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
13500 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf -
Specification Data
96906-ms21297h05008 government standard
More from these suppliers
- 5905-00-006-5483 MPN MS24118-1Noninductive Wire Wound Fixed Resistor
- 5935-00-102-7999 MPN MS16108-10Tip Jack
- 5905-00-104-8337 MPN RCR20G751JRComposition Fixed Resistor
- 5935-00-109-0662 MPN MS24266R22T55P10LEVELXElectrical Plug Connector
- 5935-00-192-6336 MPN MS3106E14S7SElectrical Plug Connector
- 5935-00-232-2684 MPN MS3119E8-3Connector Adapter
- 5935-00-259-2742 MPN MS3100A24-7SElectrical Receptacle Connector
- 5905-00-279-4320 MPN MS35045-1Composition Fixed Resistor
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-446-4015 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297H05008 | Military Standards |