NSN 5306-01-446-7919
Coaxial Connector
Between 2.032 inches and 2.062 inches fastener length, dished hexagon head style, between 0.250 inches and 0.265 inches head height, width between flats: between 0.741 inches and 0.752 inches .
Manufacturer part number NAS6608-21 for national stock number 5306014467919.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-446-7919.
-
MPN or Model
NAS6608-21
-
Schedule B
8107.90.0000 (Cadmium, wrought and articles thereof nesoi) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.735 inches -
Fastener Length
Between 2.032 inches and 2.062 inches -
Head Style
Dished hexagon -
Head Height
Between 0.250 inches and 0.265 inches -
Width Between Flats
Between 0.741 inches and 0.752 inches -
Grip Diameter
Between 0.4895 inches and 0.4995 inches -
Thread Diameter
0.500 inches -
Grip Length
Between 1.302 inches and 1.322 inches -
Thready Qty Per Inch (tpi)
20 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Cadmium -
Thread Series Designator
Unjf -
Specification Data
80205-nas6608 professional/industrial association standard
More from these suppliers
- 5935-00-496-7171 MPN MS27488-20Electrical Connector End Seal Plug
- 5935-00-520-8729 MPN NAS1641R12T12S6Electrical Receptacle Connector
- 5940-01-362-7188 MPN NAS1063Terminal Board Marker Strip
- 5305-00-038-6682 MPN NAS1581F3H4Close Tolerance Screw
- 5305-00-051-4485 MPN MS51973-10Setscrew
- 5305-00-068-0476 MPN MS35199-73Machine Screw
- 5305-00-068-0543 MPN NAS1351-3H-10PSocket Head Cap Screw
- 5305-00-068-5398 MPN NAS608C3H6Socket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-446-7919 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6608-21 | National Aerospace Standards |