NSN 5306-01-447-2565
Wheel Bolt
Between 0.970 inches and 1.030 inches fastener length, square head style, between 0.146 inches and 0.220 inches head height, width between flats: between 0.464 inches and 0.500 inches .
Manufacturer part number MS35356-33 for national stock number 5306014472565.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-447-2565.
-
MPN or Model
MS35356-33
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
A2a -
Thread Direction
Right-hand -
Thread Length
0.875 inches -
Fastener Length
Between 0.970 inches and 1.030 inches -
Head Style
Square -
Head Height
Between 0.146 inches and 0.220 inches -
Width Between Flats
Between 0.464 inches and 0.500 inches -
Thread Diameter
0.3125 inches -
Thready Qty Per Inch (tpi)
A18 -
Material
Steel -
Surface Treatment
Phosphate zinc -
Thread Series Designator
Unc
More from these suppliers
- 5935-00-058-6404 MPN MS24018-8Electrical Connector Backshell
- 4820-00-063-6450 MPN MS28771Check Valve
- 5940-00-082-4666 MPN MS17121-6Stud Terminal
- 5935-00-165-2482 MPN MS3108R18-24SElectrical Plug Connector
- 5935-00-175-8684 MPN MS3100F24-10PElectrical Receptacle Connector
- 5935-00-189-2345 MPN MS27508E10B35PDElectrical Receptacle Connector
- 5905-00-279-2546 MPN MS35044-90Composition Fixed Resistor
- 5935-00-356-4597 MPN MS3116E8-33SElectrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-447-2565 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS35356-33 | Military Standards |
MS35356-33 | Military Standards |
MS35356-33 | Military Standards |
MS35356-33 | Military Standards |