NSN 5306-01-448-9732
Wheel Bolt
0.938 inches fastener length, double hexagon w/hole head style, 0.388 inches head height, width between flats: 0.438 inches .
Manufacturer part number MS9559-09 for national stock number 5306014489732.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-448-9732.
-
MPN or Model
MS9559-09
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.840 inches -
Fastener Length
0.938 inches -
Head Style
Double hexagon w/hole -
Head Height
0.388 inches -
Width Between Flats
0.438 inches -
Extended Washer Diameter
0.562 inches -
Extended Washer Thickness
0.090 inches -
End Application
C-130j aircraft -
Thread Diameter
0.375 inches -
Grip Length
Between 0.088 inches and 0.108 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
130000 pounds per square inch -
Hardness Rating
24.0 rockwell c and 35.0 rockwell c -
Minimum Yield Strength
85000 pounds per square inch -
Material
Iron alloy 660 -
Thread Series Designator
Unjf -
Specification Data
96906-ms9559-09 government standard
More from these suppliers
- 5935-00-005-3032 MPN MS3108E22-13SCElectrical Plug Connector
- 5930-00-050-2711 MPN MS35059-19Toggle Switch
- 5940-00-082-4642 MPN MS18029-15-14Terminal Board Cover
- 5935-00-103-7476 MPN MS27497REB18-32PElectrical Receptacle Connector
- 5935-00-107-2732 MPN MS3101R18-11SCElectrical Plug Connector
- 5935-00-192-1416 MPN MS3108A28-20PElectrical Plug Connector
- 5905-00-195-6817 MPN MS35043-13Composition Fixed Resistor
- 5935-00-201-6596 MPN MS3102A22-14PYElectrical Receptacle Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-448-9732 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS9559-09 | Military Standards |
MS9559-09 | Lockheed Martin Aeronautical Systems |
MS9559-09 | Military Standards |
MS9559-09 | Lockheed Martin Aeronautical Systems |
MS9559-09 | Military Standards |
MS9559-09 | Lockheed Martin Aeronautical Systems |