NSN 5306-01-449-8543
Coaxial Connector
5.126 inches fastener length, hexagon extended washer head style, between 0.312 inches and 0.327 inches head height, width between flats: between 0.926 inches and 0.940 inches .
Manufacturer part number NAS6210-72 for national stock number 5306014498543.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-449-8543.
-
MPN or Model
NAS6210-72
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.626 inches -
Fastener Length
5.126 inches -
Head Style
Hexagon extended washer -
Head Height
Between 0.312 inches and 0.327 inches -
Width Between Flats
Between 0.926 inches and 0.940 inches -
Extended Washer Diameter
0.898 inches -
Extended Washer Thickness
0.020 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Thread Diameter
0.625 inches -
Grip Length
4.500 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
120000 pounds per square inch -
Material
Steel -
Material Specification
Nas4002 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty2, cl2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-501-1699 MPN NAS1360C2C33FMateri Aircraft Pin
- 5935-01-323-4639 MPN MS33684-18-10PElectrical Connector Insert
- 5940-01-660-0092 MPN NAS1063Terminal Board Marker Strip
- 5305-00-019-9461 MPN NAS1014-23AHexagon Head Cap Screw
- 5305-00-042-9477 MPN MS90725-91Hexagon Head Cap Screw
- 5305-00-052-6889 MPN MS35198-50Machine Screw
- 5305-00-058-2073 MPN NAS1352-02-3Socket Head Cap Screw
- 5305-00-069-5579 MPN MS90725-95Hexagon Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-449-8543 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6210-72 | National Aerospace Standards |