NSN 5306-01-450-0725
Close Tolerance Hex Head Bolt
Between 3.185 inches and 3.215 inches fastener length, spline extended washer head style, between 0.495 inches and 0.515 inches head height, extended washer diameter: between 1.037 inches and 1.047 inches .
Manufacturer part number MS21297-09036 for national stock number 5306014500725.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-450-0725.
-
MPN or Model
MS21297-09036
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.925 inches and 0.975 inches -
Fastener Length
Between 3.185 inches and 3.215 inches -
Head Style
Spline extended washer -
Head Height
Between 0.495 inches and 0.515 inches -
Extended Washer Diameter
Between 1.037 inches and 1.047 inches -
Extended Washer Thickness
Between 0.071 inches and 0.091 inches -
Grip Diameter
Between 0.5605 inches and 0.5615 inches -
Head Minor Diameter
Between 0.610 inches and 0.625 inches -
Thread Diameter
0.562 inches -
Grip Length
Between 2.250 inches and 2.260 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Hardness Rating
46.0 rockwell c and 50.0 rockwell c -
Surface Finish
32.0 microinches grip -
Material
Steel comp h11 -
Material Specification
Ams 6487 assn standard single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Mil-c-8837 type 2 cl 2 military specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5935-00-175-8244 MPN 12A11516-1Receptacle Dummy Connector
- 1560-00-227-9173 MPN 12P10420-3Aircraft Fairing
- 1560-00-436-3771 MPN 12C1100-17Sideslip Transmitter Plate
- 1560-00-455-4055 MPN 12C550-805Yaw Feel Frame Assembly
- 1560-00-463-6768 MPN 12H1344-17Rudder Swivel Support
- 1560-00-469-5732 MPN 12W8210-534Wing Landing Flap
- 1560-00-499-6119 MPN 12W8410-846Wing Landing Flap
- 1560-00-518-6844 MPN 12H1336-13Aircraft Structural Component Support
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-450-0725 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297-09036 | Lockheed Martin Corporation |
Stock Check
- NS: 18
- NE: 77