NSN 5306-01-451-5017
Coaxial Connector
3.041 inches fastener length, dished hexagon head style, 0.375 inches head height, width between flats: 1.052 inches .
Manufacturer part number NAS6312U38D for national stock number 5306014515017.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-451-5017.
-
MPN or Model
NAS6312U38D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.666 inches -
Fastener Length
3.041 inches -
Head Style
Dished hexagon -
Head Height
0.375 inches -
Width Between Flats
1.052 inches -
Hole Diameter
0.141 inches -
Grip Diameter
0.748 inches -
Thread Diameter
0.750 inches -
Grip Length
2.375 inches -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard all material responses or ams5737 assn standard all material responses -
Surface Treatment
Passivate -
Thread Series Designator
Unjf
More from these suppliers
- 5975-00-671-5938 MPN NAS622CEBHook
- 5935-01-316-9334 MPN MS33688-28-21PElectrical Connector Insert
- 1680-01-547-3390 MPN NAS76A6-114PBushing Blank
- 5935-01-646-7803 MPN NASM21250-08022Electrical Receptacle Connector
- 5940-01-384-3944 MPN NAS1063A2TB107ACTerminal Board Marker Strip
- 5935-00-111-1890 MPN NAS1665-10Electrical Connector Backshell
- 5305-00-001-1948 MPN MS51850-24Tapping Screw
- 5305-00-052-9956 MPN MS24619-14Tapping Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-451-5017 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6312U38D | National Aerospace Standards |
NAS6312U38D | National Aerospace Standards |
NAS6312U38D | National Aerospace Standards |