NSN 5306-01-451-8891
Coaxial Connector
0.766 inches fastener length, hexagon head style, 0.188 inches head height, width between flats: 0.554 inches .
Manufacturer part number NAS620605H for national stock number 5306014518891.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-451-8891.
-
MPN or Model
NAS620605H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.454 inches -
Fastener Length
0.766 inches -
Head Style
Hexagon -
Head Height
0.188 inches -
Width Between Flats
0.554 inches -
Hole Diameter
0.070 inches -
Grip Diameter
0.374 inches -
Thread Diameter
0.375 inches -
Grip Length
0.312 inches -
Hole Quantity
3 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Hole Configuration Style
Hexagon longitudinal hole -
Material
Steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response -
Surface Treatment
Cadmium and chromate -
Surface Treatment Specification
Qq-p-416 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-056-8303 MPN NAS706T4Feedthru Terminal
- 5305-00-061-5115 MPN NAS1403-33Machine Screw
- 5305-00-113-3733 MPN NAS560CK3-7Machine Screw
- 5305-00-135-5056 MPN MS24671-21Socket Head Cap Screw
- 5305-00-151-5678 MPN NAS1221-08-13Machine Screw
- 5305-00-191-3641 MPN MS51851-65Tapping Screw
- 5305-00-269-4726 MPN MS24694A106Machine Screw
- 5305-00-527-4424 MPN NAS584-7Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-451-8891 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS620605H | National Aerospace Standards |