NSN 5306-01-452-1081
Coaxial Connector
1.432 inches fastener length, dished hexagon head style, 0.140 inches head height, width between flats: 0.429 inches .
Manufacturer part number NAS6204-17X for national stock number 5306014521081.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-452-1081.
-
MPN or Model
NAS6204-17X
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.370 inches -
Fastener Length
1.432 inches -
Head Style
Dished hexagon -
Head Height
0.140 inches -
Width Between Flats
0.429 inches -
Grip Diameter
0.264 inches -
Thread Diameter
0.250 inches -
Grip Length
1.062 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp 4340 or steel comp 8740 -
Material Specification
Mil-s-5000 military specification 1st material response or mil-s-6049 military specification 2nd material response -
Surface Treatment
Cadmium or chromate -
Surface Treatment Specification
Qq-p-416 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5930-00-508-0291 MPN NAS543-2ASwitch
- 5935-00-838-6814 MPN NAS714-19Electrical Receptacle Connector
- 5940-01-520-7984 MPN NAS1063A2-107DCTerminal Board Marker Strip
- 5935-01-616-1477 MPN MS3406D14S-2EElectrical Plug Connector
- 5305-00-054-2264 MPN MS24678-57CSocket Head Cap Screw
- 5305-00-057-0535 MPN NASM51958Machine Screw
- 5305-00-058-0778 MPN MS24678-67CSocket Head Cap Screw
- 5305-00-063-3834 MPN NAS1244-13Shoulder Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-452-1081 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6204-17X | National Aerospace Standards |