NSN 5306-01-452-1237
Coaxial Connector
3.166 inches fastener length, dished hexagon head style, 0.375 inches head height, width between flats: 1.052 inches .
Manufacturer part number NAS6312U40D for national stock number 5306014521237.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-452-1237.
-
MPN or Model
NAS6312U40D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.666 inches -
Fastener Length
3.166 inches -
Head Style
Dished hexagon -
Head Height
0.375 inches -
Width Between Flats
1.052 inches -
Hole Diameter
0.141 inches -
Grip Diameter
Between 0.748 inches and 0.749 inches -
Thread Diameter
0.750 inches -
Grip Length
2.500 inches -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard 1st material response or ams5737 assn standard 1st material response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-179-2884 MPN NAS1745-18Conductor Splice
- 5940-00-725-9498 MPN NAS707C2Stud Terminal
- 5305-00-007-1550 MPN NAS1131E96PClose Tolerance Screw
- 5305-00-019-9914 MPN NAS334CP40Close Tolerance Screw
- 5305-00-022-3095 MPN NAS1352-7LE16PSocket Head Cap Screw
- 5305-00-051-9104 MPN MS24677-91Socket Head Cap Screw
- 5305-00-074-4333 MPN NAS1203-32Close Tolerance Screw
- 5305-00-134-8762 MPN NAS1402-15Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-452-1237 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6312U40D | National Aerospace Standards |