NSN 5306-01-452-4443
Coaxial Connector
Double hexagon w/hole head style, 0.300 inches head height, between 0.304 inches and 0.313 inches width between flats, extended washer diameter: between 0.428 inches and 0.438 inches .
Manufacturer part number MS21250-08028 for national stock number 5306014524443.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-452-4443.
-
MPN or Model
MS21250-08028
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.2 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Head Style
Double hexagon w/hole -
Head Height
0.300 inches -
Width Between Flats
Between 0.304 inches and 0.313 inches -
Extended Washer Diameter
Between 0.428 inches and 0.438 inches -
Extended Washer Thickness
0.069 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.250 inches -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Hardness Rating
39.0 rockwell c and 43.0 rockwell c -
Material
Steel comp 8740 or steel comp e4340 or steel comp 4340 or steel comp 6150 or steel comp 4140 -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-353-5703 MPN NAS1063B-1-10Terminal Board
- 5935-01-613-0212 MPN MS31081R24-5PElectrical Plug Connector
- 1560-01-571-8130 MPN NAS1677D29W37NAir Retaining Strap
- 5305-00-008-5899 MPN NAS1191-06P10LMachine Screw
- 5305-00-123-2711 MPN MS35308-389Hexagon Head Cap Screw
- 5305-00-144-0356 MPN NAS1096-2-52Machine Screw
- 5305-00-205-3596 MPN MS51958-67BMachine Screw
- 5305-00-225-1580 MPN NAS1191-08P5NSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-452-4443 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-08028 | National Aerospace Standards |
MS21250-08028 | Military Standards |
5306PL0705420 | Inspektorat Wsparcia Sil Zbrojnych |