NSN 5306-01-453-1624
Coaxial Connector
3.864 inches fastener length, spline extended washer head style, between 0.327 inches and 0.347 inches head height, extended washer diameter: between 0.691 inches and 0.701 inches .
Manufacturer part number AIC763-6-52 for national stock number 5306014531624.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-453-1624.
-
MPN or Model
AIC763-6-52
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.614 inches -
Fastener Length
3.864 inches -
Head Style
Spline extended washer -
Head Height
Between 0.327 inches and 0.347 inches -
Extended Washer Diameter
Between 0.691 inches and 0.701 inches -
Extended Washer Thickness
Between 0.044 inches and 0.064 inches -
Grip Diameter
Between 0.3735 inches and 0.3745 inches -
Head Minor Diameter
Between 0.423 inches and 0.438 inches -
Thread Diameter
0.375 inches -
Grip Length
3.250 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Material
Stainless steel -
Thread Series Designator
Unjf
More from these suppliers
- 5305-01-123-8456 MPN AIC812-08-9Machine Screw
- 5305-01-254-2786 MPN AIC4406-8Socket Head Cap Screw
- 5305-01-381-1408 MPN 1701-4-12Close Tolerance Screw
- 5305-01-417-2491 MPN TX1026V4-19AClose Tolerance Screw
- 5305-01-627-4248 MPN JSFB34V3-6Machine Screw
- 5306-00-079-0907 MPN AIC516B3-10Shear Bolt
- 5306-01-015-8775 MPN AIC753-3-7Close Tolerance Bolt
- 5306-01-042-2355 MPN AIC516B6-6Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-453-1624 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AIC763-6-52 | Sps Technologies, Llc |