NSN 5306-01-454-0493
Coaxial Connector
4.280 inches fastener length, double hexagon extended washer head style, 1.155 inches head height, width between flats: 1.3125 inches .
Manufacturer part number MS21250-20040 for national stock number 5306014540493.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-454-0493.
-
MPN or Model
MS21250-20040
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.760 inches -
Fastener Length
4.280 inches -
Head Style
Double hexagon extended washer -
Head Height
1.155 inches -
Width Between Flats
1.3125 inches -
Extended Washer Diameter
Between 2.115 inches and 2.125 inches -
Extended Washer Thickness
0.269 inches -
Grip Diameter
Between 1.2475 inches and 1.2490 inches -
Thread Diameter
1.2500 inches -
Grip Length
Between 2.490 inches and 2.510 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
202000 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, ty ii, cl 2 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5930-00-087-8433 MPN MS24659-28EToggle Switch
- 5935-00-180-2961 MPN MS18193S2Electrical Connector Backshell
- 5935-00-189-2532 MPN MS3474L14-12PElectrical Receptacle Connector
- 5935-00-201-7928 MPN MS3102A18-1SElectrical Receptacle Connector
- 5935-00-222-7915 MPN MS3106B36-10PElectrical Plug Connector
- 5935-00-232-2589 MPN MS18188-1Electrical Receptacle Connector
- 5905-00-257-2631 MPN MS35043-203Composition Fixed Resistor
- 5935-00-260-0516 MPN MS35082TS102P01Plug-in Electronic Components Socket
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-454-0493 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21250-20040 | Military Standards |