NSN 5306-01-454-4582
Close Tolerance Hex Head Bolt
3.531 inches fastener length, hexagon head style, between 0.109 inches and 0.141 inches head height, width between flats: between 0.365 inches and 0.377 inches .
Manufacturer part number AN173-34 for national stock number 5306014544582.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-454-4582.
-
MPN or Model
AN173-34
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.406 inches -
Fastener Length
3.531 inches -
Head Style
Hexagon -
Head Height
Between 0.109 inches and 0.141 inches -
Width Between Flats
Between 0.365 inches and 0.377 inches -
Grip Diameter
Between 0.1889 inches and 0.1894 inches -
Shank Unthreaded Hole Diameter
0.070 inches first hole -
Thread Diameter
0.190 inches -
Grip Length
3.125 inches -
Thready Qty Per Inch (tpi)
32 -
Distance From Head Largest Bearing Surface To Shank Hole Center
3.391 inches first hole -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-192-1499 MPN AN3101A28-17SElectrical Plug Connector
- 5935-00-500-7890 MPN AN3102A18-15SElectrical Receptacle Connector
- 5935-00-552-2384 MPN MS3106A14S9SElectrical Plug Connector
- 4820-00-698-3314 MPN AN6207-6Check Valve
- 5935-00-222-7828 MPN AN3106A28-12PXElectrical Plug Connector
- 5305-00-005-3507 MPN AN565B4L5Setscrew
- 5305-00-151-2521 MPN AN509-10R15REV2Machine Screw
- 5305-00-151-2697 MPN AN526-836-9Machine Screw
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-454-4582 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN173-34 | Aeronautical Standards Group |