NSN 5306-01-455-3450
Coaxial Connector
Dished hexagon head style, 24 thready qty per inch (tpi), 160000 pounds per square inch min. tensile strength (psi), material: steel comp e4340 and steel comp 8740 .
Manufacturer part number NAS6205-64D for national stock number 5306014553450.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-455-3450.
-
MPN or Model
NAS6205-64D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Head Style
Dished hexagon -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel comp e4340 and steel comp 8740 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-159-0252 MPN 706S3Stud Terminal
- 5940-01-439-4148 MPN NAS1063A6-510BJTerminal Board Marker Strip
- 5305-00-007-6186 MPN NAS1100E08-22Machine Screw
- 5305-00-055-2567 MPN NAS1219-08-8Machine Screw
- 5305-00-059-8226 MPN MS35214-1Machine Screw
- 5305-00-071-1766 MPN MS90725-108Hexagon Head Cap Screw
- 5305-00-071-2233 MPN MS90725-18Hexagon Head Cap Screw
- 5305-00-141-6856 MPN NAS1635-08-44Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-455-3450 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6205-64D | National Aerospace Standards |
Stock Check
- NE: 240
- NS: 153