NSN 5306-01-455-4002
Coaxial Connector
4.323 inches fastener length, dished hexagon head style, between 0.110 inches and 0.125 inches head height, width between flats: between 0.367 inches and 0.376 inches .
Manufacturer part number NAS6203-64 for national stock number 5306014554002.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-455-4002.
-
MPN or Model
NAS6203-64
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.323 inches -
Fastener Length
4.323 inches -
Head Style
Dished hexagon -
Head Height
Between 0.110 inches and 0.125 inches -
Width Between Flats
Between 0.367 inches and 0.376 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
Thread Diameter
0.190 inches -
Grip Length
4.000 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-836-0091 MPN NAS705G3Stud Terminal
- 5940-01-425-6043 MPN NAS1063A5-439Terminal Board Marker Strip
- 4920-01-532-5091 MPN NAS77A12-94Airc Sleeve Bushing
- 5305-00-007-0287 MPN NAS1131E88PClose Tolerance Screw
- 5305-00-008-5888 MPN NAS1102E06-12PMachine Screw
- 5305-00-143-2721 MPN NAS1506-25Close Tolerance Screw
- 5305-00-147-6175 MPN MS35214-106Machine Screw
- 5305-00-177-5716 MPN NAS1218-04-2Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-455-4002 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6203-64 | National Aerospace Standards |