NSN 5306-01-455-5487
Coaxial Connector
Between 2.329 inches and 2.359 inches fastener length, undercut hexagon head style, between 0.865 inches and 0.877 inches head height, width between flats: between 0.865 inches and 0.877 inches .
Manufacturer part number NAS6309U28D for national stock number 5306014555487.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-455-5487.
-
MPN or Model
NAS6309U28D
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.594 inches -
Fastener Length
Between 2.329 inches and 2.359 inches -
Head Style
Undercut hexagon -
Head Height
Between 0.865 inches and 0.877 inches -
Width Between Flats
Between 0.865 inches and 0.877 inches -
Grip Diameter
Between 0.5610 inches and 0.5615 inches -
Shank Unthreaded Hole Diameter
0.141 inches threads and 0.151 inches threads -
Thread Diameter
0.5625 inches -
Grip Length
Between 1.740 inches and 1.760 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
1.337 inches threads -
Material
Iron alloy 660 -
Material Specification
Ams 5731 assn standard single material response or ams 5737 assn standard single material response -
Thread Series Designator
Unjf -
Specification Data
80205-nas6309 professional/industrial association standard
More from these suppliers
- 5940-01-451-2576 MPN NAS1063D1-1Terminal Board Marker Strip
- 5940-01-384-5052 MPN NAS1063A20TB42BTerminal Board Marker Strip
- 5940-01-430-2097 MPN NAS1063B18-37Terminal Board Marker Strip
- 5305-00-007-6171 MPN NAS1743C4T8USocket Head Cap Screw
- 5305-00-038-6684 MPN NAS1581A3H8TClose Tolerance Screw
- 5305-00-051-9135 MPN NASM51958Machine Screw
- 5305-00-051-9135 MPN MS51958-111Machine Screw
- 5305-00-058-4011 MPN MS24694S105Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-455-5487 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6309U28D | National Aerospace Standards |