NSN 5306-01-456-0613
Coaxial Connector
0.498 inches fastener length, dished hexagon head style, between 0.125 inches and 0.140 inches head height, width between flats: between 0.430 inches and 0.439 inches .
Manufacturer part number NAS1304-1 for national stock number 5306014560613.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-456-0613.
-
MPN or Model
NAS1304-1
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.425 inches -
Fastener Length
0.498 inches -
Head Style
Dished hexagon -
Head Height
Between 0.125 inches and 0.140 inches -
Width Between Flats
Between 0.430 inches and 0.439 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.052 inches and 0.072 inches -
Thready Qty Per Inch (tpi)
28 -
Material
Steel comp 4140 or steel comp e4340 or steel comp 4340 or steel comp 8740 -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-510-2081 MPN NAS1063A7Terminal Board Marker Strip
- 5305-00-008-5895 MPN NAS1102-06-14BMachine Screw
- 5305-00-058-2072 MPN MS24678-2Socket Head Cap Screw
- 5305-00-059-4538 MPN MS35190-12Machine Screw
- 5305-00-097-4534 MPN NAS1221-3E14Machine Screw
- 5305-00-102-4553 MPN MS27039-6-17Machine Screw
- 5305-00-225-4590 MPN MS24694A52Machine Screw
- 5305-00-242-7251 MPN MS51021-48Setscrew
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-456-0613 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1304-1 | National Aerospace Standards |
Stock Check
- NS: 3142
- NE: 17873
- SV: 9
- AR: 10