NSN 5306-01-456-1456
Coaxial Connector
Between 0.573 inches and 0.603 inches fastener length, hexagon head style, 0.110 inches head height, width between flats: 0.430 inches .
Manufacturer part number NAS1103-5 for national stock number 5306014561456.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-456-1456.
-
MPN or Model
NAS1103-5
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.276 inches -
Fastener Length
Between 0.573 inches and 0.603 inches -
Head Style
Hexagon -
Head Height
0.110 inches -
Width Between Flats
0.430 inches -
Grip Diameter
Between 0.188 inches and 0.189 inches -
Thread Diameter
0.190 inches -
Grip Length
Between 0.302 inches and 0.322 inches -
Thready Qty Per Inch (tpi)
32 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Steel -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-446-4551 MPN NAS1063A13-125Terminal Board Marker Strip
- 5305-00-003-6823 MPN NAS6002U24Machine Screw
- 5305-00-006-8307 MPN NAS1218-4-36PMachine Screw
- 5305-00-054-6652 MPN MS51957-28Machine Screw
- 5305-00-054-8434 MPN NAS1102-02-6Machine Screw
- 5305-00-061-0224 MPN NAS608C4H9Socket Head Cap Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
- 5305-00-151-5750 MPN NAS1101C06-14BMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-456-1456 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS1103-5 | National Aerospace Standards |