NSN 5306-01-457-1397
Coaxial Connector
Between 2.588 inches and 2.618 inches fastener length, dished hexagon head style, between 0.375 inches and 0.390 inches head height, width between flats: between 1.052 inches and 1.064 inches .
Manufacturer part number NAS6712DU25 for national stock number 5306014571397.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-457-1397.
-
MPN or Model
NAS6712DU25
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093490 - Bolt/nut/screw/clips/fastener/etc -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.016 inches and 1.066 inches -
Fastener Length
Between 2.588 inches and 2.618 inches -
Head Style
Dished hexagon -
Head Height
Between 0.375 inches and 0.390 inches -
Width Between Flats
Between 1.052 inches and 1.064 inches -
Grip Diameter
Between 0.7485 inches and 0.7490 inches -
Shank Unthreaded Hole Diameter
0.141 inches first hole and 0.151 inches first hole -
Thread Diameter
0.750 inches -
Grip Length
Between 1.552 inches and 1.572 inches -
Thready Qty Per Inch (tpi)
16 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.639 inches first hole and 2.689 inches first hole -
Surface Finish
32.0 microinches threads -
Material
Iron alloy 660 -
Material Specification
Ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unf
More from these suppliers
- 5935-00-972-8484 MPN NAS715-11BElectrical Receptacle Connector
- 5940-01-447-2950 MPN NAS1063C3-504BETerminal Board Marker Strip
- 5305-00-007-6173 MPN NAS1100E00-6Machine Screw
- 5305-00-078-9820 MPN NAS517-3-39Machine Screw
- 5305-00-081-1474 MPN NAS608C832H24Socket Head Cap Screw
- 5305-00-197-2399 MPN MS27039C1-34Machine Screw
- 5305-00-449-2456 MPN NAS1351-06LE6PSocket Head Cap Screw
- 5305-00-451-6861 MPN NAS1102E3-14PMachine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-457-1397 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6712DU25 | National Aerospace Standards |