NSN 5306-01-457-1404
Coaxial Connector
Between 1.834 inches and 1.859 inches fastener length, dished hexagon head style, between 0.156 inches and 0.171 inches head height, width between flats: between 0.492 inches and 0.502 inches .
Manufacturer part number NAS6705U22 for national stock number 5306014571404.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-457-1404.
-
MPN or Model
NAS6705U22
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
1.8 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.469 inches -
Fastener Length
Between 1.834 inches and 1.859 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Thread Diameter
0.3125 inches -
Grip Length
Between 1.365 inches and 1.385 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
160000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response or ams5737 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-380-6875 MPN NAS1063B156-167Terminal Board Marker Strip
- 5940-01-448-0168 MPN NAS1063A2-107ASTerminal Board Marker Strip
- 5305-00-001-9750 MPN NAS1351-4-14PSocket Head Cap Screw
- 5305-00-052-8242 MPN MS24617-56Tapping Screw
- 5305-00-057-0491 MPN MILS7839Machine Screw
- 5305-00-059-3670 MPN NAS1635+3+44Machine Screw
- 5305-00-059-9564 MPN NAS1221-4-12Machine Screw
- 5305-00-140-4860 MPN NAS1096-1-56Machine Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-457-1404 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6705U22 | National Aerospace Standards |