NSN 5306-01-457-4138
Wheel Bolt
Between 2.500 inches and 2.562 inches fastener length, crowned hexagon head style, 0.203 inches head height, width between flats: between 0.553 inches and 0.565 inches .
Manufacturer part number NAS428-6A-24 for national stock number 5306014574138.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-457-4138.
-
MPN or Model
NAS428-6A-24
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 2.438 inches and 2.469 inches -
Fastener Length
Between 2.500 inches and 2.562 inches -
Head Style
Crowned hexagon -
Head Height
0.203 inches -
Width Between Flats
Between 0.553 inches and 0.565 inches -
End Application
F-15s -
Thread Diameter
0.375 inches -
Grip Length
Between 0.031 inches and 0.062 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Part Name Assigned By Controlling Agency
Bolt, machine -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Material Specification
Mil-b-6812 military specification single material response -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class2 assn standard single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-511-8759 MPN NAS1063A20-20DTTerminal Board Marker Strip
- 5305-00-032-3955 MPN NAS1153-38Close Tolerance Screw
- 5305-00-127-0198 MPN NAS1189-3P14Socket Head Cap Screw
- 5305-00-145-7048 MPN AN501-3-5Machine Screw
- 5305-00-150-3478 MPN NAS1190-4P14Socket Head Cap Screw
- 5305-00-182-9386 MPN NAS623-4-50Machine Screw
- 5305-00-269-4221 MPN MS24694S163Machine Screw
- 5305-00-276-9586 MPN NAS608-4H-28PSocket Head Cap Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-457-4138 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS428-6A-24 | National Aerospace Standards |