NSN 5306-01-458-3586
Coaxial Connector
Between 3.012 inches and 3.042 inches fastener length, spline drive shear head head style, 0.350 inches head height, grip diameter: between 0.6230 inches and 0.6240 inches .
Manufacturer part number 3D0146-10-36D for national stock number 5306014583586.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-458-3586.
-
MPN or Model
3D0146-10-36D
-
Schedule B
8105.90.0000 (Cobalt, wrought, and articles thereof) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.777 inches -
Fastener Length
Between 3.012 inches and 3.042 inches -
Head Style
Spline drive shear head -
Head Height
0.350 inches -
Grip Diameter
Between 0.6230 inches and 0.6240 inches -
Shank Unthreaded Hole Diameter
0.146 inches first hole and 0.151 inches first hole -
Head Minor Diameter
Between 0.922 inches and 0.954 inches -
Thread Diameter
0.625 inches -
Grip Length
Between 2.240 inches and 2.260 inches -
Thready Qty Per Inch (tpi)
18 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Distance From Head Largest Bearing Surface To Shank Hole Center
2.854 inches first hole -
Surface Finish
32.0 microinches grip -
Material
Cobalt alloy mp-159 -
Material Specification
Ams5842 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-310-5259 MPN PBF1069-253CSocket Head Cap Screw
- 5305-01-359-4725 MPN LE111-0033-0311Machine Screw
- 5305-01-359-4729 MPN LE111-0032-2403Machine Screw
- 5305-01-435-6614 MPN BACB30LU9-27Close Tolerance Screw
- 5305-01-512-8385 MPN TX1024V4-2-5AClose Tolerance Screw
- 5305-01-541-5189 MPN 120-265E4P2Mate Aircraft Screw
- 5306-00-121-4222 MPN 20-065-05010Shear Bolt
- 5306-00-802-0880 MPN 51B464-3A23Machine Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-458-3586 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3D0146-10-36D | Boeing Company, The |
PBF1543-10-36D | Sps Technologies, Llc |
84877-10-36D | Sps Technologies, Llc |