NSN 5306-01-459-3126
Coaxial Connector
Minimum tensile strength at 900 deg f.
Manufacturer part number 03A100-5-20 for national stock number 5306014593126.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-459-3126.
-
MPN or Model
03A100-5-20
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.538 inches -
Fastener Length
Between 1.773 inches and 1.803 inches -
Head Style
Spline extended washer -
Head Height
Between 0.302 inches and 0.322 inches -
Extended Washer Diameter
Between 0.521 inches and 0.531 inches -
Extended Washer Thickness
Between 0.051 inches and 0.071 inches -
Grip Diameter
Between 0.3115 inches and 0.3120 inches -
Head Minor Diameter
Between 0.383 inches and 0.389 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 1.240 inches and 1.260 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
180000 pounds per square inch -
Surface Finish
32.0 microinches threads -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-680-5873 MPN BACB30LU4D17Machine Screw
- 5305-01-628-4510 MPN 3M1170V6-15AClose Tolerance Screw
- 5306-01-006-9449 MPN J644P10DMachine Bolt
- 5306-01-023-9062 MPN GB511H-8-46Shear Bolt
- 5306-01-049-4051 MPN BACB30LT5U20Close Tolerance Bolt
- 5306-01-123-9781 MPN GB511H8-15Shear Bolt
- 5306-01-141-7183 MPN ST3M497-6-14Shoulder Bolt
- 5306-01-142-3553 MPN VAL23608-4-58Shoulder Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-459-3126 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
03A100-5-20 | Northrop Grumman Technical Services, |
VCG0017-5-20 | Valley-todeco, Inc. |
AIC1655-5-20 | Sps Technologies, Llc |
PBF1422-5-20 | Sps Technologies, Llc |
123711-5-20 | Sps Technologies, Llc |
SII1185-5-20 | Sonic Industries Inc. |
MB211-5-20 | Hi-shear Corporation |
VS3320-5-20 | Alcoa Global Fasteners, Inc. |
MB211-5-20 | Lisi Aerospace Canada Corp |
X385-5-20 | Huck International, Inc. |
X385-5-20 | Huck Intl Inc |
03A100-5-20 | Northrop Grumman Systems Corporation |