NSN 5306-01-460-0444
Shouldered Rivet Ring Bolt
About this product
Between 0.375 inches and 0.378 inches eye inside diameter, 0.094 inches shoulder thickness, between 2.312 inches and 2.359 inches shank length, eye stock thickness: between 0.183 inches and 0.193 inches .
Manufacturer part number AN46C22A for national stock number 5306014600444.
Datasheet
-
Product description
Eye Bolt NSN 5306-01-460-0444.
-
MPN or Model
AN46C22A
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 0.624 inches and 0.671 inches -
Eye Inside Diameter
Between 0.375 inches and 0.378 inches -
Shoulder Thickness
0.094 inches -
Shank Length
Between 2.312 inches and 2.359 inches -
Eye Stock Thickness
Between 0.183 inches and 0.193 inches -
Shoulder Diameter
0.750 inches -
Overall Length
3.328 inches -
Thread Diameter
0.375 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Distance From Center Of Eye To Shank End
Between 2.906 inches and 2.953 inches -
Eye Outside Width
0.750 inches -
Material
Steel comp 4140 or steel comp 8740 or steel comp 8630 or steel comp 8735 or steel comp 4130 or steel comp 4037 -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Style Designator
Round, closed w/shoulder -
Thread Series Designator
Unf
More from these suppliers
- 4820-01-466-7814 MPN 49355K23Ball Valve
- 4820-01-601-0781 MPN 7768K16Check Valve
- 4820-01-617-6757 MPN 1093K1Safety Relief Valve
- 5925-01-528-6976 MPN 72015K42Circuit Breaker
- 5305-01-442-7547 MPN 92210A242Socket Head Cap Screw
- 5305-01-465-5968 MPN 91290A326Socket Head Cap Screw
- 5305-01-526-0694 MPN 93635A322Hexagon Head Cap Screw
- 5305-01-528-6392 MPN 93190A542Hexagon Head Cap Screw
Eye Bolt
An externally threaded device whose threaded portion is of one nominal diameter, without a head, but with the unthreaded end either bent more than 225 degrees (3.925 radians) or cast, forged, or punched to resemble an eye. See also bolt, hook. Excludes connector, rod end.
Pricing and Availability
Get a quote for 5306-01-460-0444 eye boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
AN46C22A | National Aerospace Standards |
AN46C22A | Aeronautical Standards Group |
AN46C22A | Mcmaster-carr Supply Company |
Stock Check
Availability for this item was last checked on 10/23/23.
The quantities and conditions available at the time were:
- NS: 9