NSN 5306-01-460-9874
Coaxial Connector
Between 0.745 inches and 0.775 inches fastener length, spline extended washer head style, between 0.240 inches and 0.260 inches head height, extended washer diameter: between 0.460 inches and 0.470 inches .
Manufacturer part number MS21297H04004 for national stock number 5306014609874.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-460-9874.
-
MPN or Model
MS21297H04004
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.495 inches -
Fastener Length
Between 0.745 inches and 0.775 inches -
Head Style
Spline extended washer -
Head Height
Between 0.240 inches and 0.260 inches -
Extended Washer Diameter
Between 0.460 inches and 0.470 inches -
Extended Washer Thickness
Between 0.026 inches and 0.046 inches -
Hole Diameter
Between 0.023 inches and 0.042 inches -
Grip Diameter
Between 0.2485 inches and 0.2495 inches -
Head Minor Diameter
Between 0.235 inches and 0.250 inches -
Thread Diameter
0.2500 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
16000 pounds per square inch -
Hole Configuration Style
Spline -
Material
Steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5905-00-108-6922 MPN MS35043-67Composition Fixed Resistor
- 5935-00-140-0059 MPN MS27473T12A98PElectrical Plug Connector
- 5935-00-147-7308 MPN MS3101F24-6SElectrical Plug Connector
- 5935-00-201-7943 MPN MS3107B22-14PElectrical Plug Connector
- 5935-00-227-8391 MPN MS3106B22-10PElectrical Plug Connector
- 5935-00-233-3442 MPN MS27487-10-1Electrical Connector Backshell
- 5935-00-258-0143 MPN MS3100A18-8PElectrical Receptacle Connector
- 5935-00-259-0048 MPN MS3106A20-15SElectrical Plug Connector
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-460-9874 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297H04004 | Military Standards |