NSN 5306-01-461-0287
Coaxial Connector
Between 0.901 inches and 0.931 inches fastener length, spline extended washer head style, between 0.302 inches and 0.322 inches head height, extended washer diameter: between 0.575 inches and 0.585 inches .
Manufacturer part number MS21297H05005 for national stock number 5306014610287.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-461-0287.
-
MPN or Model
MS21297H05005
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.589 inches -
Fastener Length
Between 0.901 inches and 0.931 inches -
Head Style
Spline extended washer -
Head Height
Between 0.302 inches and 0.322 inches -
Extended Washer Diameter
Between 0.575 inches and 0.585 inches -
Extended Washer Thickness
Between 0.035 inches and 0.055 inches -
Hole Diameter
Between 0.050 inches and 0.060 inches -
Grip Diameter
Between 0.3110 inches and 0.3120 inches -
Head Minor Diameter
Between 0.360 inches and 0.375 inches -
Thread Diameter
0.3125 inches -
Grip Length
Between 0.240 inches and 0.260 inches -
Hole Quantity
4 -
Hole Type
Drilled -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
16000 pounds per square inch -
Hole Configuration Style
Spline -
Material
Stainless steel -
Surface Treatment
Cadmium -
Thread Series Designator
Unjf
More from these suppliers
- 5940-00-243-7679 MPN NAS704S2Stud Terminal
- 5305-00-005-0655 MPN NAS1151E3Close Tolerance Screw
- 5305-00-042-6425 MPN MS24667-25Socket Head Cap Screw
- 5305-00-082-1995 MPN NAS1352C02-3PSocket Head Cap Screw
- 5305-00-182-9378 MPN NAS1218-3-10PMachine Screw
- 5305-00-206-3663 MPN MILS7839Machine Screw
- 5305-00-206-3708 MPN NASM7839Machine Screw
- 5305-00-269-3221 MPN MS90725-71Hexagon Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-461-0287 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
MS21297H05005 | National Aerospace Standards |
MS21297H05005 | Military Standards |