NSN 5306-01-461-0391
Coaxial Connector
Between 1.015 inches and 1.045 inches fastener length, spline drive shear head head style, 0.187 inches head height, grip diameter: between 0.311 inches and 0.312 inches .
Manufacturer part number 3D0146-5-9 for national stock number 5306014610391.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-461-0391.
-
MPN or Model
3D0146-5-9
-
Schedule B
8105.90.0000 (Cobalt, wrought, and articles thereof) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.467 inches -
Fastener Length
Between 1.015 inches and 1.045 inches -
Head Style
Spline drive shear head -
Head Height
0.187 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Head Minor Diameter
0.514 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.553 inches and 0.573 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Material
Cobalt alloy mp-159 -
Material Specification
Ams 5842 federal specification single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-236-0023 MPN PBF1068-607CMachine Screw
- 5305-00-310-5209 MPN PBF1069-205CSocket Head Cap Screw
- 5305-01-076-4889 MPN NAS1101-08-26Machine Screw
- 5305-01-266-9359 MPN PBF116B3-8Close Tolerance Screw
- 5305-01-334-7367 MPN LD111-0044-2311Close Tolerance Screw
- 5305-01-420-3603 MPN PBF1417-5-40Close Tolerance Screw
- 5305-01-435-6313 MPN BACB30LU9-21Close Tolerance Screw
- 5305-01-435-7935 MPN BACB30LU9-34Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-461-0391 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3D0146-5-9 | Boeing Company, The |
PBF1543-5-9 | Sps Technologies, Llc |
84877-5-9 | Sps Technologies, Llc |