NSN 5306-01-461-0409
Coaxial Connector
Between 0.890 inches and 0.920 inches fastener length, spline drive shear head head style, 0.187 inches head height, grip diameter: between 0.311 inches and 0.312 inches .
Manufacturer part number 3D0146-5-7 for national stock number 5306014610409.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-461-0409.
-
MPN or Model
3D0146-5-7
-
Schedule B
8105.90.0000 (Cobalt, wrought, and articles thereof) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
0.467 inches -
Fastener Length
Between 0.890 inches and 0.920 inches -
Head Style
Spline drive shear head -
Head Height
0.187 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
Head Minor Diameter
0.514 inches -
Thread Diameter
0.312 inches -
Grip Length
Between 0.428 inches and 0.448 inches -
Thready Qty Per Inch (tpi)
24 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Material
Cobalt alloy mp-159 -
Material Specification
Ams 5842 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-501-9640 MPN LS15265V3-1Close Tolerance Screw
- 5305-00-680-5873 MPN BACB30LU4D17Machine Screw
- 5305-01-327-9691 MPN PBP1417-4-14AClose Tolerance Screw
- 5305-01-348-7103 MPN PBF1484-4-13Close Tolerance Screw
- 5305-01-423-4569 MPN LD111-0044-2510Close Tolerance Screw
- 5305-01-431-9981 MPN PBF1475-3-4Close Tolerance Screw
- 5305-01-512-8373 MPN TX1027C5-16AClose Tolerance Screw
- 5305-01-581-5533 MPN 120-225-3-27Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-461-0409 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
3D0146-5-7 | Boeing Company, The |
PBF1543-5-7 | Sps Technologies, Llc |
84877-5-7 | Sps Technologies, Llc |