NSN 5306-01-462-4433
Wheel Bolt
0.500 inches fastener length, hexagon head style, between 0.302 inches and 0.323 inches head height, width between flats: between 0.725 inches and 0.750 inches .
Manufacturer part number 5210120 PART 21 for national stock number 5306014624433.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-462-4433.
-
MPN or Model
5210120 PART 21
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.1 lb -
Thread Class
2a -
Thread Direction
Right-hand -
Thread Length
0.500 inches -
Fastener Length
0.500 inches -
Head Style
Hexagon -
Head Height
Between 0.302 inches and 0.323 inches -
Width Between Flats
Between 0.725 inches and 0.750 inches -
Thread Diameter
0.500 inches -
Thready Qty Per Inch (tpi)
13 -
Material
Stainless steel -
Material Specification
Astmf593 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 4820-00-045-5057 MPN 845-2110235ASSY8GA2INCheck Valve
- 5905-00-197-3162 MPN 5266810-008Voltage Sensitive Resistor
- 4820-00-287-3317 MPN J3152924PC33Globe Valve
- 4820-00-334-3849 MPN PC461S42-07PC109Valve Disk
- 4820-00-446-3499 MPN ASR7S4901-01PC43Safety Relief Valve
- 4820-00-469-0201 MPN 404-2409-69957ALT3PCD3Plug Cock
- 5935-00-927-3009 MPN 2906073-18Electrical Plug Connector Body
- 5935-00-938-7266 MPN 5399724-2Electrical Plug Connector
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-462-4433 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
5210120 PART 21 | Naval Sea Systems Command |
MS16208-100 | National Aerospace Standards |
MS16208-100 | Military Standards |
MS16208-100 | National Aerospace Standards |
5210120 PART 21 | Naval Sea Systems Command |
MS16208-100 | Military Standards |
MS16208-100 | National Aerospace Standards |
5210120 PART 21 | Naval Sea Systems Command |
MS16208-100 | Military Standards |