NSN 5306-01-462-5307
Wheel Bolt
1.250 inches fastener length, crowned hexagon head style, 0.141 inches head height, width between flats: 0.438 inches .
Manufacturer part number NAS428H4A12 for national stock number 5306014625307.
Datasheet
-
Product description
Machine Bolt NSN 5306-01-462-5307.
-
MPN or Model
NAS428H4A12
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
Between 1.188 inches and 1.219 inches -
Fastener Length
1.250 inches -
Head Style
Crowned hexagon -
Head Height
0.141 inches -
Width Between Flats
0.438 inches -
Hole Diameter
0.046 inches -
Thread Diameter
0.250 inches -
Grip Length
Between 0.031 inches and 0.062 inches -
Hole Quantity
1 -
Hole Type
Drilled -
Features Provided
Finished head -
Thready Qty Per Inch (tpi)
28 -
Min. Tensile Strength (psi)
125000 pounds per square inch -
Hardness Rating
26.0 rockwell c and 32.0 rockwell c -
Hole Configuration Style
Hexagon flats -
Material
Steel comp 4037 or steel comp 4130 or steel comp 8630 or steel comp 8735 or steel comp 8740 or steel comp 4140 -
Material Specification
Qq-p-416 type 2 cl 3 federal specification single material response -
Surface Treatment
Cadmium and chromate -
Thread Series Designator
Unf
More from these suppliers
- 5940-01-425-6514 MPN NAS1063A5-447Terminal Board Marker Strip
- 5940-01-425-7406 MPN NAS1063A11-306Terminal Board Marker Strip
- 5305-00-005-5809 MPN NAS1631E3Machine Screw
- 5305-00-007-3027 MPN NAS1102E04-11Machine Screw
- 5305-00-053-1114 MPN MS51861-15Tapping Screw
- 5305-00-059-8251 MPN MS35214-26Machine Screw
- 5305-00-068-0476 MPN MS35199-73Machine Screw
- 5305-00-080-0072 MPN NAS1625-6Machine Screw
An externally threaded fastener designed for insertion through holes in assembled parts and normally intended to be tightened or released by torquing a nut. the threaded and unthreaded portions are both of one nominal diameter of 0.190 inch (5 mm) or larger. The head is not designed to be held or driven with an inserted driver or by the thumb and fingers. a locking feature may be incorporated in the design of the head or threads. head dimensions and sizes of threaded and unthreaded portions shall conform to internationally recognized fastener standards. for items having a grip length portion machined to a tolerance of 0.0015 inch (0.038 mm) or less, bolt, shear. See also screw, cap, hexagon head and screw, machine.
Pricing and Availability
Get a quote for 5306-01-462-5307 machine boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS428H4A12 | National Aerospace Standards |
NAS428H4A12 | National Aerospace Standards |
NAS428H4A12 | National Aerospace Standards |
NAS428H4A12 | National Aerospace Standards |
NAS428H4A12 | National Aerospace Standards |
NAS428H4A12 | National Aerospace Standards |