NSN 5306-01-463-1350
Coaxial Connector
Nonlocking, drilled shank and drilled head.
Manufacturer part number NAS6205-8H for national stock number 5306014631350.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-463-1350.
-
MPN or Model
NAS6205-8H
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
Thread Class
3a -
Thread Length
0.438 inches -
Fastener Length
0.938 inches -
Head Style
Dished hexagon -
Head Height
Between 0.156 inches and 0.171 inches -
Width Between Flats
Between 0.492 inches and 0.502 inches -
Grip Diameter
Between 0.311 inches and 0.312 inches -
End Application
Aircraft kdc-10, airframe -
Thread Diameter
0.312 inches -
Grip Length
0.500 inches -
Thready Qty Per Inch (tpi)
24 -
Material
Steel -
Surface Treatment
Cadmium -
Surface Treatment Specification
Qq-p-416, type ii, class 2 federal specification all treatment responses -
Thread Series Designator
Unjf
More from these suppliers
- 5940-01-413-3017 MPN NAS1063B55-74Terminal Board Marker Strip
- 5940-01-451-2572 MPN NAS1063A3-504AJTerminal Board Marker Strip
- 5940-01-384-3944 MPN NAS1063A2TB107ACTerminal Board Marker Strip
- 5305-00-007-6172 MPN NAS1100C00-4Machine Screw
- 5305-00-068-5405 MPN NASM16996-14Socket Head Cap Screw
- 5305-00-074-4436 MPN NAS623-5-6Machine Screw
- 5305-00-151-6197 MPN NAS1635-00-7Machine Screw
- 5305-00-223-3967 MPN NAS334CF14Close Tolerance Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-463-1350 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
NAS6205-8H | National Aerospace Standards |