NSN 5306-01-464-0107
Close Tolerance Hex Head Bolt
4.231 inches fastener length, hexagon head style, 1.230 inches head diameter, head height: 0.469 inches .
Manufacturer part number 5749946 FIND NO 50 for national stock number 5306014640107.
Datasheet
-
Product description
Close Tolerance Bolt NSN 5306-01-464-0107.
-
MPN or Model
5749946 FIND NO 50
-
Schedule B
7318.15.2000 (Bolts and bolts and their nuts or washers exported in the same shipment) -
NMF (National Motor Freight)
093486 - Bolts, Nuts Or Screws, NOI (sub 3) -
Unit Weight (Est.)
0.7 lb -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.356 inches -
Fastener Length
4.231 inches -
Head Style
Hexagon -
Head Diameter
1.230 inches -
Head Height
0.469 inches -
Width Between Flats
Between 1.239 inches and 1.252 inches -
Grip Diameter
Between 0.8710 inches and 0.8740 inches -
Thread Diameter
0.875 inches -
Grip Length
2.875 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
140000 pounds per square inch -
Material
Iron alloy 660 -
Material Specification
Ams5731 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unc
More from these suppliers
- 5950-00-245-0996 MPN 5381303 PART 22Power Transformer
- 5950-00-284-1009 MPN 1080H30 H27Reactor
- 4820-00-483-0696 MPN 803-4384536-41BGlobe Valve
- 5935-00-532-2882 MPN 2635-088-38 ITEM 1-20Electrical Receptacle Connector
- 4820-00-562-1059 MPN 4824E3105926PC16Fluid Valve Stem
- 5950-00-725-5865 MPN 174A7667G3Electrical Coil
- 5930-00-948-2702 MPN 2994989-12Push Switch
- 4820-01-040-9014 MPN 820-2179382-20Globe Valve
An externally threaded fastener whose unthreaded portion is of a specified grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten-thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. A locking feature may be incorporated in the design of the head or threads. For items having close tolerance, and fabricated from material having 160,000 pounds per square inch (1100 megapascals) minimum tensile strength, see bolt, shear. For items fabricated from material having less than 160,000 pounds per square inch (1100 megapascals) minimum tensile strength and not having a close tolerance, see bolt, machine.
Pricing and Availability
Get a quote for 5306-01-464-0107 close tolerance boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
5749946 FIND NO 50 | Naval Sea Systems Command |
NAS1014-46A | National Aerospace Standards |
246-5749946 | National Aerospace Standards |
5749946 FIND NO 50 | Naval Sea Systems Command |
NAS1014-46A | National Aerospace Standards |
246-5749946 | National Aerospace Standards |