NSN 5306-01-465-3830
Coaxial Connector
Between 4.024 inches and 4.054 inches fastener length, spline extended washer head style, 0.700 inches head height, extended washer diameter: between 1.615 inches and 1.625 inches .
Manufacturer part number VCG0037-14-42 for national stock number 5306014653830.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-465-3830.
-
MPN or Model
VCG0037-14-42
-
Schedule B
7508.90.0000 (Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.414 inches -
Fastener Length
Between 4.024 inches and 4.054 inches -
Head Style
Spline extended washer -
Head Height
0.700 inches -
Extended Washer Diameter
Between 1.615 inches and 1.625 inches -
Extended Washer Thickness
0.120 inches -
Grip Diameter
Between 0.8730 inches and 0.8740 inches -
Head Minor Diameter
Between 0.923 inches and 0.938 inches -
Thread Diameter
0.875 inches -
Grip Length
Between 2.615 inches and 2.635 inches -
Thready Qty Per Inch (tpi)
14 -
Min. Tensile Strength (psi)
220000 pounds per square inch -
Minimum Yield Strength
125000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Nickel alloy 718 -
Material Specification
Ams 5662 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 5305-00-508-2829 MPN LS15266V3-7Close Tolerance Screw
- 5305-01-170-8503 MPN 3M927-3L8Close Tolerance Screw
- 5305-01-331-7579 MPN VCL0009-3-11Close Tolerance Screw
- 5305-01-454-0974 MPN LD111-0046-2415Machine Screw
- 5305-01-535-6807 MPN 3M1170C47AClose Tolerance Screw
- 5306-00-958-9265 MPN VEP220121-GV12Shear Bolt
- 5306-01-046-0512 MPN VAL23608-5-7Shoulder Bolt
- 5306-01-059-6701 MPN VFK100G-10050Shear Bolt
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-465-3830 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
VCG0037-14-42 | Valley-todeco, Inc. |
AIC874-14-42 | Sps Technologies, Llc |
PBF1594-14-42 | Sps Technologies, Llc |
84604-14-42 | Sps Technologies, Llc |
3D0073-14-42 | Boeing Company, The |