NSN 5306-01-465-4600
Coaxial Connector
Between 6.089 inches and 6.119 inches fastener length, spline extended washer head style, between 1.090 inches and 1.110 inches head height, extended washer diameter: between 2.539 inches and 2.549 inches .
Manufacturer part number 84366-22-66 for national stock number 5306014654600.
Datasheet
-
Product description
Shear Bolt NSN 5306-01-465-4600.
-
MPN or Model
84366-22-66
-
Schedule B
8105.90.0000 (Cobalt, wrought, and articles thereof) -
Thread Class
3a -
Thread Direction
Right-hand -
Thread Length
1.979 inches -
Fastener Length
Between 6.089 inches and 6.119 inches -
Head Style
Spline extended washer -
Head Height
Between 1.090 inches and 1.110 inches -
Extended Washer Diameter
Between 2.539 inches and 2.549 inches -
Extended Washer Thickness
Between 0.188 inches and 0.208 inches -
Grip Diameter
Between 1.3725 inches and 1.3740 inches -
Single Shear Strength
132000 pounds per square inch -
Head Minor Diameter
Between 1.485 inches and 1.500 inches -
Thread Diameter
1.375 inches -
Grip Length
Between 4.115 inches and 4.135 inches -
Thready Qty Per Inch (tpi)
12 -
Min. Tensile Strength (psi)
260000 pounds per square inch -
Surface Finish
32.0 microinches grip -
Material
Cobalt alloy mp-159 -
Material Specification
Ams 5842 assn standard single material response -
Surface Treatment
Passivate -
Surface Treatment Specification
Qq-p-35 federal specification single treatment response -
Thread Series Designator
Unjf
More from these suppliers
- 1680-01-562-2594 MPN HST12AZ5-7Materi Aircraft Pin
- 5305-00-067-7810 MPN SFH22D6A13Machine Screw
- 5305-00-073-1950 MPN 73573-4-6CSocket Head Cap Screw
- 5305-00-144-9753 MPN NAS1101E08-7Machine Screw
- 5305-00-421-7888 MPN 3M263-4-7Close Tolerance Screw
- 5305-00-461-5596 MPN 64040H10-20Close Tolerance Screw
- 5305-00-541-9045 MPN NAS1221-3-2Machine Screw
- 5305-00-559-4901 MPN NAS1190-02P8NSocket Head Cap Screw
A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Pricing and Availability
Get a quote for 5306-01-465-4600 shear boltManufacturer Part Numbers and Alternates
MPN manufacturer part number | Registrant or Supplier |
---|---|
84366-22-66 | Sps Technologies, Llc |
3D0166-22-66 | Boeing Company, The |